Ref. No. : CA - 17809 - (Maintenance and Service - Mechanical – with 15.8 years in Plastic Industry)

Education

B.E. in Electrical Engineering From Maharana Pratap Collage of Technology in Gwalior Affiliated to Rajiv Gandhi Proudyogiki Vishwavidylaya (R.G.P.V University) Bhopal in 2009 With 65%

Skill Sets

knowledge and skills
Problem solving and analytical ability
People management skills.
Planning and decision making skills.
Excellent communication, reporting and presentation skill.
Teaming, Leading and developing people.  
Ensuring technician’s staff trained.
Self-Motivated & Hard worker
Team building skill
Knowledge of SAP – PM, MM
Master material control system.

Work Experience

Family Manager-Electrical operation & maintenance Lead Engineer
Since May 2013 
Company Profile: Manufacturing Continuous Process (Chemical/petrochemical) Plant 
Job Profile:
Leading a team (30 Nos) of Technicians for smooth operation & maintenance.
Operation & maintenance of Electrical Equipment of Utility/CP Plant.
Accountable for maintaining and maximizing reliability & availability of Electrical equipment & distribution system /power Electronics equipment /power system at plant.
Review maintenance Activities, and prioritize critical jobs. carry out schedule and chance based maintenance of electrical Equipment
Lead troubleshooting for resolution of major & critical failures, issues.generate LFI, Alerts based on major failures, safety incidences.
Carry out RCA (Root cause Analysis) for equipment failures, monitor implementation of RCA Recommendations.
Review and maintain Equipment protection scheme, protection relay setting  & relay co-ordination
Assist manager in spares inventory management to maintain stock level & issuing spares for job Execution.
Operation and maintenance of power transformer, CT/PT, protective relay, MCB,PMCC,MCC and motor
Preparation of SOP,SMP for all jobs and monitoring for implementation
Daily Power monitoring, calculations and reporting at monthly basis, knowledge  of management
Prepare Maintenance Schedule for daily , monthly, quarterly etc. as per vendor specification and record history of the equipment  so as to monitor health of the equipment
Responsible for plant maintenance cost budgeting and optimization of resources.
Coordination with various departments for smooth functioning of the equipment by feedback and suggestions from them.
Reduce production loss from defects/failure/breakdown. 
Identify potential hazards that are inherent when working in substation and switch room, participate in job safety analysis for all the high risk activities. Conduct tool box talk, be a role model for implementation of work permit system, LOTO for all the jobs.

Testing of Electrical Equipment design for 6.6KV, 415 Voltage:
Power & Distribution Transformer Testing Ratting Up to 2.5 MVA,3.15 MVA, 32.5 MVA
CT and PT Testing
Vacuum circuit Breaker Testing Ratting Up to 1250 Amp, 2000Amp
LT Motor Testing
HT Panel ,PCC,VFDMCC,MCC,PDB,PFIC,UPS
Transformer oil testing –BDV.

Electrical Engineer 
Dec 2012 to May 2013
Company Profile: Company Engaged in manufacturing Bulk Continuous process plant with capacity of 1100 TRD.   
Job Profile:
Worked on Project for Erection and commissioning of Continuous Process (polyester/Chemical) Plant.
Overall responsibility of the Electrical Operation & maintenance activity in the plant
Review maintenance Activities, and prioritize critical jobs. Carry out schedule and chance based maintenance of electrical Equipment
Adherence to monthly preventive maint.Schedule of DB, s Changeover switches, Transformer, Switchgear VCB, ACB & APFC Panels at Substation.
Monitoring of Consumption & Arrangement of Electrical Spares Parts.
Erection & Commissioning of PCC, MCC, EPCC, EMCC, PDB, MLDB, PFIC PANEL 
Erection & Commissioning of 2500KVA,6.6KV/0.433KV, distribution Transformers WTI3335/5A.CL-5, 20VA NCT-1-4000/1A, CL-PS NCT-2-4000/1A, CL5P15 15VA Make VOLTAMP
Erection & Commissioning of VFD in Make VACON Drives through DCS.
To monitor & keep optimum loading on DG sets for better utilization of generated power and to reduce cost of generated power 2000KVA,1.6MW DG SET (4 nos) forward grid Synchronizing Make Cummins.
Maintaining documents for Electrical maintenance.
Provided technical guidance, training to sub ordinates.
Carry out risk assessment and adhere to all the safety norms in routine and shutdown jobs.
Maintenance works like panels, MCC & PCCs, HT & LT Breakers, Maintenance and Overhauling of AC Motor. Make Siemens, L&T, ABB 
Condition monitoring and Operation & Maintenance of Power & Distribution Transformers Make Bharat Bijlee
Condition monitoring and Operation & Maintenance of Diesel Generator sets & cooling tower.
Operation & Maintenance of Starter panel such as Soft starter, Star/delta, Reverse/forward Starter etc.
Operation and Maintenance of Battery bank, charger & APFC panels etc. 
Variable frequency Drives (HOT/COLD Changeover) scream
HT/LT Automatic power factor correction Panel (APFC).
Cooling tower, chillers, fire hydrant system, PA System , FA System

Assi. Electrical Engineer
Oct 2010 to Nov 2012
Company Name: Welspum Syntex Limited 
Company Profile: Company Engaged in manufacturing Continuous process Polyester Plant with capacity of 600 Tons/day. 
Job Profile:
66 KV Switchyard, 66KV/6.6KV, PTR 12.5 MVA Transformer Make Voltamp and Cromptan Greaves.
66 KV Switchyard main Equipments such as (Power Transformer , Circuit Breaker, CT, PT,Isolator,Earthing Switch, bus Section, Lightning Arrester, Capacitor Bank, Protective Relay, Battery Bank  OLTC and (CT Class 0.2, 0.5 & 1.0, 5P10, 5P20 & PS CLASS, ) and 66KV/6.6KV  Switch yard  Condition Based Monitoring.
Parallel operation of 66KV/6.6KV, Power Transformer Ratting up to 12.5MVA Dyn11 Make Voltamp and CG Power Transformers.
Voltamp & CG Make distribution transformer having capacity of 2000 KVA (6.6 KV/0.433 KV) DTR Distribution Transformers
Operation & Maintenance of HT DG Sets make Wartsila SACM Diesel 2*2875KVA, having capacity of 4.6 MW, 6.6KV rated generating voltage. 
Synchronization operation of Diesel Generator with Grid Incomer.
Generator control Panel ABB makes operates through DCS.
66KV Switchgears (SF6, VCB & ACB circuit breakers (CG, ABB MAKE ) L&T make.
UPS, Battery charger and battery maintenance (condition monitoring, maintenance of Ni-Cd batteries, Discharge testing of battery bank)
Diagnostic testing of motor (Analysis by Tan Delta test, PI test & Dielectric Discharge test)
Protection system include Microprocessor based relay, Numerical relay.
Condition monitoring and Preventive Maintenance of LT Motor.
Annual Maintenance of PCC, MCC, EPCC, EMCC, PDB, MLDB, SLDB, PFIC PANEL.
Schedule maintenance of Variable frequency Drives (VFD) in Make Vacon.
Maintaining the records and history registers of all Electrical equipments
Preventive & Breakdown maintenance, trouble shooting.
Condition monitoring & planning for shut down jobs.
Manpower management.
Connected running load 7.5 MW , with the help of Gujarat Electricity Board (GEB) and DG sets of (4.6 MW) Average load (2.2 MW) per DG SET.
Condition monitoring  & Operation and Maintenance of Chillers, Air Compressor, AHU, Quench Etc.

G.E.T Engineer
27 Aug 2009
Company Name: HEC Infra Project Pvt. Ltd
Company Profile: 
Job Profile:
Worked on Project for Erection and Commissioning of faucet Plant. Planning & execution of project with client (Kohler India pvt. ltd.: GIDC Jhagadia Ankelshwar)
Execution of the project Engineering involving Installation, Erection and  Commissioning of   Electrical Equipments such as HT Switchboard, LT Switchboard VCB , ACB Switchgear, Power and DistributionTransformer, LT Motor, HT Motor Energy meter,66/6.6KV Substation ,  PCC,MCC, PFIC, MLDB Panel, with HT cable (Rated Voltage 6.6kv). Elevator, PA system, AC UPS - 230V.

Industrial Training:
Have a Vocational Industrial Training at Bharat heavy Electrical limited (BHEL) Haridwar.    
Subject-: (manufacturing of Turbo Generator & Hydro Generator coil and insolating details 

Have a Vocational Industrial Training at North Central Railway (NCR) Gwalior.
Subject-: (Sub-Station and power supply installation)

Electrical statuary and regulatory Reliance Industries limited (Vadodara plant

Future Goals

To be in a challenging and growth oriented environment, where I can explore my analytical, logical engineering skills as well as my knowledge to achieve the organizations goel.

Copyright © 2003 - 2015 Smartech Global Solutions Ltd. All rights reserved. Designed by Plastemart.com