• Gender: Male
• Age: 28
• Designation: Project Associate
• Highest Education Level: Masters - Degree
• Notice Period: 30  Days
• Work Experience: 6.8 Year(s)

Education

Institute of Chemical Technology, Mumbai
Master of Engineering – Plastic Engineering Pursuing 2020-2022 from Maharashtra Institute of Technology, Pune
Bachelor of Engineering – Polymer Engineering CGPA: 7.30/10 in 2016 – 2019 from Government Polytechnic, Amravati
Diploma in Engineering – Plastics and Polymer Engineering with Percentage 78.19 in 2013-2016 from Nirmala High School, Kapustalni
SSC MSBSHSE with Percentage: 80.80 in 2013

Skill Sets

KEY EXPERTISE / SKILLS
Polymer Testing & Characterization
Polymer Processing
Polymer Composites
Polymer Compounding
Plastic Product Design
Surface Modification of Polymers
Rubber Technology
Rubber Reclaim.

Work Experience

Project Associate
Dec - 2019 to Mar - 2020
Company Profile: development and consulting organization with a focus on chemistry and chemical engineering.

Job Profile:
1. Worked on various project such as Fabrication of Polypropylene Micro-Cellulose Composite, Egg shell powder reinforced
bio-composite.
2. Worked on General Mills project i.e. Research exploration for weight reduction and barrier property enhancement of PP
formulations for use in yogurt packaging.
3. Also work over Dynamic Rheometers geometry such Small amplitude oscillatory share (SAOS) and Extensional Viscosity
fixture (EVF).

Trainee Officer (Production)
From June 17, 2019 - Dec. 17, 2019
Company profile- manufacturer of reclaimed rubber from used tyres, up-scaled poly-amide from nylon waste

Job profile-
1. Production Planning and maintain the process.
2. To oversee supervisor and workers who manufacture and inspect product.
3. Job is to monitor team members verify production rate and improve productivity.
4. Responsible for monitoring daily production activity to ensure OTIF & controlling the variance of the stocks.
5. Coordinating with internal department like quality, stores, dispatch, maintenance etc in order to ensure on time
delivery of the finished goods.
6. Maintaining EHS and 5S on the shop floor, Following IMS & IATF to ensure right quality material is produced with zero
rejection
7. To train production staff, supervisors, schedule assembly teams, and perform control checks on finished goods.
8. To keep constant communication with the team leaders.

INTERNSHIPS
Shri Krishna Industries, Jalgaon June 1, 2018 - June 30, 2018
Supreme Blow Plast, Akola Dec. 15, 2017 - Dec. 31, 2017

PROJECTS
Jute and Sisal fibre reinforced polymer Composite
Project Guide: Prof. (Dr.) R. S. N. Sahai ¦ ICT, Mumbai (General Engineering Department)
Polypropylene Micro-Cellulose Composite
Project Guide: (Senior Scientist) Dr. Harshawardhan V. Pol ¦ National Chemical laboratory, Pune (Polymer Science
and Engineering Division)
Prof (Dr.) Deepti Marathe ¦ MIT, Pune (Polymer Engineering Department)
Brief Info: In this study, the silane treated micro-crystalline cellulose (MCC)/ Polypropylene (PP) composite was prepared. MCC
has recently gained more interest owing to its renew-ability, non-toxicity, economic value, biodegradability, high mechanical
properties, high surface area and bio-compatibility. In the first step, the treatment of micro-crystalline cellulose (MCC) with 3-
(amino-propyl) trimethoxysilane was carried-out in order to obtain the MCC having good compatibility with PP matrix. Rheological
test like SAOS (Small amplitude oscillatory shear) and EVF (Extensional Viscosity Fixture) were employed to analyse the
compatibility of SiMCC with the PP. On the basic this test we choose two compositions and foam a master batch of 1 kg of each
composition, which we have further compression moulded to foam sheets for thermoforming to study the melt strength
improvement and sag & thickness distribution.
EVALUATION OF BREAKDOWN IN EXT-RUDER MACHINE & IT’S MAINTENANCE
Project Guide: Prof. Nishant Y. Bhore ¦ Government Polytechnic Amravati (Plastics and Polymer Engineering
Department)
Brief Info: In this project we have worked over as proto-type single screw ext-ruder which is under maintenance. We study the
structure and working of the ext-ruder modified its power transmission assembly and worked over the screw barrel and its
alignment. Also, we have modified the Die based on the modified output. In the last stage to test the proper working of ext-ruder
we extrude LDPE material from it.

Future Goals

Seeking an Internship opportunity where my skills and experience in Plastic & Polymer Engineering will be fully utilized
and to fill the gap between theoretical & industrial knowledge. Also, if possible, I can work on the project of my expertise for the company and after completing my masters I can continue to work with the company as a full-time employ.