• Gender: Male
• Age: 55
• Designation: Production Manager
• Highest Education Level: Graduate - Degree
• Preferred Country: India
• Preferred Location: Delhi
• Work Experience: 26.8 Year(s)

Education

B.E in Mechanical Engineering from Nagpur University.
10+2 from CBSE Board, Delhi
10th from CBSE Board, Delhi

Skill Sets

MS – Office, Internet skill.

Work Experience

Production Manager
From - Sept. 2021 to Present
Comapny profile - company whose main activity is the production of mattresses, foam, spring, orthopaedic (medical).

JOb profile -
Handling of 50 man power.
Working on FIN Engineering corporation DBF-120 automatic discontinuous forming machine.
Responsible for the chemical formulation and forming of flexible polyurethane foam.
Good experience in producing polyurethane foam from low density to high density.
Ability to work on a single block production machine and continuous production machine.
Formulating the formulation of different densities with different hardness and flexibility.
Implementation of machine preventive calibration, programming and basic requirements for production process.
Monitoring the production process and handling troubleshooting in minimum specific time.
Testing and introduction of new chemicals for improvement of the products and reduced scrap cost.
Responsible for various and inventory such as TDI, Polyols, blowing agent and colors paste from various suppliers such as Dow huntsman, shell Evonik, DABCO 33LV catalyst momentive
(A-33/STLPL) KOSMOS-29, KOSMOS T-9, Silicon 500, Concentrol (PU3280) (L2370/STL)
DABCO (DC5933), Momentive (L-580/STL), Hardner (SHD640), CaCO3 (SUPCAL 2), Colours. Analysis of the daily and monthly production consumption.

Production Manager
Nov. 2019 to Sept. 2021
Company profile -manufacturers of flexible Polyurethane foams, Production of mattresses, spring, orthopedic (medical).

Job profile -
Handling of 50 man power.
Production of flexible slabstock polyurethane foams (Conventional foams, filled foams, high resilience foams).
Production of viscoelastic slabstock foams ( low resilience/ slow recovery foams).
Working on YUNG YU low High pressure max foam machine.
Formulating the formulation of different densities with different hardness and flexibility.
Implementation of machine preventive, calibrations programming and basic requirements for production process.
Monitoring the production process and handling troubleshooting in minimum specific time.
Testing and introduction of new chemicals for improvement of the products and reduced scrap cost.
Responsible for various and inventory such as TDI, Polyols, MDI Blowing agent and colors paste from various suppliers such as Dow huntsman, shell Evonik, DABCO 33LV catalyist momentive
(A-33/STLPL) KOSMOS-29, KOSMOS T-9, Silicon 500, Concentrol (PU3280) momentive
(L23T0/STL) DABCO (DC5933), Momentive (L-580/STL).
Analysis of the daily and monthly production consumption.

Production Manager
From - May 2009 to Nov. 2019
KML Manufactures

Production Manager
April 2004 to May 2009
U-FOAM Pvt.Ltd. U.P