• Gender: Male
• Age: 39
• Designation: Executive
• Highest Education Level: Graduate - Degree
• Notice Period: 30  Days
• Work Experience: 16.3 Year(s)

Education

B.Tech (Mech Engineering) From L B S College Of Engg (Kannur University, Kerala), in 2008 with 68%

H.S.C. From G.H.S.S Kuttamath in 2003 with 66%

S.S.L.C From G.H.S.S Kuttamath in 2001 with 76%

Skill Sets

Experience In Automotive Plastic Part Design With Relevant Experience In  Centre Console Panel,Rear Bumper,under Hood And Underbody Panels Using Catia V5 And Team Center With Wers(world Engg Release System) Exposure.

To specialize in Automotive Plastic Product Design And Development
Ambitious &self motivated with a strong desire & determination to achieve both personal & professional goals by implementing a proactive & professional approach.
Coordinate interdepartmental relationships for highest levels of co-operation & efficiency

CATIA V5(Part Modeling, Surfacing ,Assembly & Drafting)

Work Experience

Design Specialist - Operational
Since May 2014
Company Profile: Is a high-end Engineering Solutions provider offering services ranging from Design Engineering, Process Engineering, Reverse Engineering, Product Data Management (PDM), Knowledge Based Engineering and Software Customization, also provides additional capacity for IT systems development/maintenance and Engineering Services support. 
Job Profile:
Project:center Console Cup Holder Assembly NPD Project For D472.
Client:the Lincoln Motor Company, a luxury Vehicles division Of The Ford Motor Company 
Scope Of Work: Designed successfully the new console developed under guidance of D&R engineer(USA)
Console assembly- beverage container holder with decorative bezel, stabilization mechanism and ambient light puck & top panel

Project:center Console Cup Holder Assembly NPD Project For C520.
Client:the Ford Motor Company,europe, a luxury vehicles division of The Ford Motor Company,USA
Scope Of Work:Cost reduction/removal of usual finger stabilization mechanism on new console
Console assembly- beverage container holder with decorative bezel, stabilization mechanismand ambient light puck & top panel.

Project:center Console Cup Holder Assembly OPD Project For S550
Scope Of Work: OPD engineering change process.
The change request is raised by the engineer from North America and is taken, processed, verified and released

Senior Design Engineer - Design
JULY 2013 to April 2014
Company Profile : Provide Engineering, Manufacturing and Enterprise (EME) Services and Solutions for Automotive, Aerospace, Defence, Industrial and General Manufacturing industries.
Job Profile : 
Project Name : Underhood Plastic Parts Concept Generation And Modification
Client : Roechling 
Duration : Sep 2013 to April 2014.
Job Profile
understanding customer requirements through WebEx.
Creating the tooling and sliding directions if they have not provided.
Involvement in the Design and developing of following partsusing CATIA in respective environment (Flexplus) for customers like Daimler, BMW, AUDI, Nissan, Toyota, Ford
Degas Bottle Concept Design For BMW F49
Under Body Panel And Deckel Design For Porsche Panamera.

Project Name : Bumper Project
Client : Plastic Omnium
Duration : July 2013 to Sep 2013.
Job Profile
Involvement in the Design and developing 3D modelsof ofrear bumper,lower spoiler and tow eye coverusing CATIA V5R21 with less material and tool usage 

Sr.Design Engineer
February 2012 to July 2013
Company Name : Mahindra Engineering Services
Job Profile : 
Project Name : IKCO Door Trim
Client : Iran Khodro Industrial Group (IRAN)
Duration : February 2012 to November 2012.
Job Profile :
The following door trim parts were designed as per the customer requirement.
Door panel Roll topGrab handle Insert Map pocketArm rest

Project Name : BY736 Concept Suv Interior Central Console Front And Rear
Client : Bentley (UK)
Duration : December 2012 to July 2013.
Job Profile
interaction with onsite coordinator 
building the sections and considering all the interference parts like BIW 
The following parts were made as per the client’s requirements.
Front and rear upper and lower panel - Front ,upper and rear fascia - Front and rear bezel
Front and rear stowage box -Front and rear cup holder - Front and rear substrate

Design Engineer - Design
Company Name : Pioneer Technologies
Job Profile : 
Client : Tata And Bajaj Auto 
My roles and responsibilities include :
with the help of the following inputs ,
A-Surface,Surrounding reference parts like BIW, Fixation clips
built the 3D modeling through the interaction with onsite coordinator by considering material properties and while building the sections, need to consider all the interference parts like BIW and the corresponding mating parts gap and flush conditions.
The following parts were made as per the client’s requirements.

Ignition Panel Cover,battery Panel,air Filter Box etc.
Used my expertise in the followings to design the plastic parts:
Parametric conversion of plastic component (Reverse Engineering)
GeneratedReinforcements And Fitments like bosses, ribs, holes, snaps, etcfor mechanical strengthening

Client : TITANX, USA
My roles and responsibilities include :
3D modeling for engine cooling systems including HVAC cover panels per customer specified std.
Assistance to the detailers for proper approach, in interpretation of specifications, in understanding drawings, concepts  & troubleshootingInteraction with the onsite coordinator and controlling the quality process
Maintain activity log sheet reports as part of ISO certification procedure
Initial order was only for dwg creation, due to exceptional quality, fetched many more projects and business growth

Future Goals

To specialize in Automotive Plastic Product Design And Development Ambitious &self motivated with a strong desire & determination to achieve both personal & professional goals by implementing a proactive & professional approach. Coordinate interdepartmental relationships for highest levels of co-operation & efficiency