Ref. No. : CA - 27963 - (Maintenance and Service - Electrical – with 13.4 years in Plastic Industry)

Education

Electrical and Electronics Engineering From Vignan Bharathi Institute of Technology, JNTUH in 2011 with 64%

Skill Sets

Working knowledge on plc like simens, Allen Bradley, working knowledge on AC/ DC Drives Like ABB / Delta Drives

Holding 33kv licence from TSPDCL.
Programming logic control.

Flexible with positive attitude towards challenges.
Proper knowledge on motor related application.
Knowledge about power consumption guidelines and electrical distribution standards.
Knowledge on transformer related works.

Capable of handling adaptive and challenging works.
Goal oriented approach to problem solving.

Work Experience

Maintenance Engineer
Since May 2017
Company Profile: Manufacturer Of HDPE Pipe And Corrugated Pipes.
Job Profile:
Taking care of rotating machines (extrude-rs and downstream equipment like vacuum tanks,spray tanks, puller, cutter, and scoketing machine).
Taking care of electrical and mechanical activities in plant and coordinating with the shift technicians in 24*7 for smooth operation of plant.
Prepared and implemented of sop for smooth functioning of maintenance department.
Coordinating with production team to plan the PM schedule on daily and monthly basis.
Condition monitoring and predictive maintenance of critical equipment and corrective actions to avoid breakdown.
Planning for resources and manpower for planned shutdown of plant execution including start up.
Daily power monitoring, calculations and reporting at monthly basis.
Daily procurement through ERP and maintaining minimum spares for attending breakdown and reducing breakdown time.
Coordination with various departments for smooth functioning of the equipment by feedback and suggestions from them.
ISO documentation, quality circle formation for detecting problems and solving from shop floor employees.
Conducting safety audits within the department and ensuring the compliance from all the employees and updating the checklists and audit reports.
Operation and maintenance of electrical and mechanical system, utilities and machines.
Operation and maintenance of DG sets.

Projects handling:-
Installing of extrude-rs and down stream machines of cincinati (425kg/hr) and Thyshon make(765kg/hr).
Installing of rapid crusher,Auto loader,Jenco systems .
Installing of pulverizing machine.
Carried out the retrofitting of PCC panels.
Renovation of plant lighting

Junior Engineer
Apr 2015 to Apr 2017
Company Profile: Manufacturer of HDPE Pipes And Drip Irrigation Pipe, Later On Started Production Of PVC Pipes.

Jr. Engineer
July 2012 to Aug 2015
Company Name : Visaka industries ltd.
Company Profile : Manufacturer of corrugated cement fiber sheets.

Trainee Engineer
Sept 2011 to Sept 2012
Company Name : Hindustan aeronautics ltd
Company Profile : Is an Indian state owned aerospace and defence company

Experience:-
Planning, execution, installation, testing and commissioning of electrical and mechanical systems.
Working knowledge on programmable logic control and programmable automation controller.
Knowledge and troubleshooting experience on gearbox, motors, vacuum pumps and water pumps, ext-ruder screw, Barrel cooling pumps, screw cooling pumps.
Knowledge and troubleshooting experience of Mixers and Redllers.
Knowledge and troubleshooting experience of hydraulic machines and crusher machines.
Knowledge and troubleshooting experience of AC/DC motors, MCC/PCC panels, LT switch-gears.
Knowledge and troubleshooting experience of AC/DC drives (ABB, ACS, DELTA, PARKER).
Knowledge and troubleshooting experience of instruments like limit switches, sensors, pneumatic valves, load cells, level indicators, encoders, pneumatic cylinders, flow-control valves, heaters.
Daily monitoring of chillers, compressors, Air dryers, DG sets, Eot crane, ups and updating of checklists.

Summary
Competent in Electrical&Mechanical works in industries like Petro-Chemicals (HDPE&PVC) and Asbestosis/Electrical Projects and O&M professional with 7+ years of proven record within industry bellwether. Electrical Maintenance of Utilities like DGset,Chillers,Cooling Towers,Compressors. Holding 33kv licence and Coordination with the State Electricity Board for EB licence, yearly Safety audits, maintaining Engineering Stores with minimum stock level and MIS reporting. With accrued expertise in technical support, client relations and customer service. Admired and valued leader with an exceptional capacity to train, mentor and guide junior-level professionals in order to achieve assigned targets independently towards achieving cumulative success. Possesses exceptional negotiation, admirable client convincing, high level analytical aptitude and problem solving skills plus outstanding organization and coordination abilities. Keenly interested to work in a more challenging role with any progressive enterprise to share gained experience and developed skills.

Future Goals

Growth

Copyright © 2003 - 2015 Smartech Global Solutions Ltd. All rights reserved. Designed by Plastemart.com