plastemartjobs.com

Email: jobs@plastemart.com, hr@plastemart.com

Download Date: 6/1/2025 7:07:43 PM

________________________________________________________________________________________

RefNo: CA - 5420
Gender: Male
Age: 47

Designation: Senior Executive

Highest Education Level: Post Graduate Diploma

Preferred Location: Anywhere

Education Details: 
Ph. D. (Chemical Engineering) 

Work Place: Polymer Science and Engineering Group, Chemical Engineering and Process Development Division(NCL), Pune

M. E. (Chemical Engineering) 

Passed with First Class from Tatyasaheb Kore Institute of Engineering and Technology (T. K. I. E. T.), Warananagar, Shivaji University, Kolhapur, (M.S.), India, 2002. 

B. Tech. (Polymers (Plastics)) Passed with First Class from College of Engineering and Technology, Akola, Amaravati University, Amaravati (M.S.), India, 1999. 

Diploma (Polymer and Plastics Engineering) Passed with First Class (Distinction) from Institute of Petrochemical Engineering, Dr. Babasaheb Ambedkar Technological University, Lonere, Raigad (M.S.), India, 1996. 

Secondary School Certificate (S.S.C.) Passed with First Class (Distinction) from Pune Board (M.S), India, 1993. 



Computer Knowledge

C, C++, Basic, MS Office 95/97/98/2000/XP 



Skill Sets: 
Research and development

Work Experience: 25.6

Work Experience Details: 
Research Engineer in New Products Development (Core R &D),

April 2007 to till date

Presently working with Global R & D Center, 



Senior Research Fellowship

May 2004 to March 2007: 

Worked with National Chemical Laboratory, Pune, India: 

Job Profile

Synthesis and Characterization of Nanoparticles/Nanocomposites 

Studied in detail the Structure-Property-Processing Relationships for the development of Thermoplastic based Polymer Composites/Nanocomposites/Blends for various Applications. 

Masterbatch Preparation for the Uniform Dispersion of Nanoparticulate Fillers into Polymer Matrix/Polymer Blend. 

Manufacturing, Analysis and Optimization of Thermoplastic based composites/nanocomposites and Blends. 

Investigated effect of an addition of commercial as well as nanoparticulate fillers on structure development, Crystallization behavior and morphology of Thermoplastic based Nanocomposites/Blends. 

Investigated effect of an addition of commercial as well as nanoparticulate fillers on Transport, Mechanical, Optical and Thermal Properties of Polymer based nanocomposites. 

Investigated effect of an addition of commercial as well as nanoparticulate fillers on nanocomposites coatings. 



Project Assistant

July 2002 to April 2004

Worked with Industry sponsored project by SJS Plastiblends at National Chemical Laboratory, Pune, India: 

Job Profile

Impact Modification of Polypropylene Molding grade composites for Automotive applications. 

Achieved very high Impact strength, flexural strength and modulus without any loss of tensile strength and flexibility (% elongation at break) (US Patent: 20050127558). 

Manufacturing and Development of Polymer Composites for Automotive Applications with very high Impact and Flexural Modulus. 

Flame Retardancy and Mechanical Properties of Polypropylene based Nanocomposites filled with Mg(OH)2 nanoparticles. 

Corrosion resistance nanocomposite coatings (ZnO nanoparticles). 



Project Trainee 

July 2001 to June 2002

Post-graduation project

Job Profile

Crystallization Behavior, Morphology and Properties of Polypropylene containing commercial as well as nanoparticulate Fillers, at NCL, Pune (M.S.), India. (Thesis advisor: Dr. S. Radhakrishnan). 



Lecturer

July 2000 to December 2000

Worked with  Plastic Engineering Department at Government Polytechnic, Miraj, Sangli, Maharashtra state, India. 



Production Engineer

July 1999 to June 2000

Worked with Sunflex Pipes Pvt. Ltd. Ichalkaranji, Kolhapur. 

Job Profile 

Developed a Novel Synthetic Paradigm towards Nanoparticulate fillers and investigated the effect of an addition of nanoparticulate fillers on Structure development, Morphology, Crystallization behavior, Transport (Permeability), Mechanical, Thermal and Optical properties of its Thermoplastic based Composites/Nanocomposites. 

Polymer Processing: Haake Rheocord, DSM Micro 5 Microcompounder & Microinjection Molding unit, Techno Search Compression Molding unit, Haake Polylab Single Screw and Twin Screw Extruder coupled with Sheet, Tape and Ribbon die, KOLSITE make Blown film extrusion plant, etc. 



________________________________________________________________________________________